Natural Heating

All of the tube supplied by Solar Supplies UK Ltd come FULLY ASSEMBLED. They have all been assembled in the factory and tested before dispatch!!

Product Summary

· The standard tube works on heat-pipe conduction, there is no water inside, thus it successfully prevents the defects of tube block and low power output caused by water fouling and deposits of dust and sand.

 

· It prevents the tube from being easily broken caused by the volume expansion when the water in tube freezes in the freezing conditions.

 

· Low thermal capacity makes the tube start up quickly. Energy inside tube can be taken out within only 2 minutes under sunshine.

 

· The insulation temperature of the heat-pipe can reach 250℃. The average heat efficiency can still be more than 50% even at temperatures as low as -50℃.

 

· High efficient selective absorptive coatings and vacuum heat insulation technology ensure the tube to gets a higher heat output in cloudy weather and in damp conditions, especially in winter.

 

· It perfectly solves the fatal defect of the common all-glass vacuum tube solar water heater, which will not run if one of the tubes is out of work.  

Picture shown is one of a large scale.

Showing that we not only supply to house hold user but to hotels, warehouse and factories ect, of all scale.

The supertube has the same construction and advantages as the standard tube but is 58mm in diameter and is 1800 mm long.

 

This gives it a collector area of 50% more than the standard tube, and therefore an increase of 50% in output.